An innovation in space and energy saving, the Billi Quadra Plus range delivers invigorating filtered boiling and chilled drinking water and in addition supply a hot water supply to a separate sink mixer. This eliminates the need for a separate hot water supply and is ideal for office breakout areas. The Quadra Plus offers all the benefits of the Quadra range including elegant styling combined with cutting-edge technology and meets green building requirements, disability access and ergonomic design imperatives. Our Australian designed and made products are quite simply the world’s premium drinking water systems.
Our feature-rich Quadra Plus range is an extension of our flagship boiling and chilled water products. This innovation from Billi has gained wide acceptance for commercial uses and offers exceptional design benefits:
Unprecedented Tap Options
Following collaboration with architects, designers, engineers and end users, Billi has created an exceptional new range of dispensers to suit our Boiling and Chilled systems. Comprising three different styles of tap and a corresponding drain font, this range ticks all the boxes with clean sophisticated style, advanced safety technology, ease of installation and designer finishes available. In addition we have a new pin lever mixer tap for the Quadra Plus or the option of a stylish gooseneck mixer.
As with our other drinking water appliances, the entire Quadra Plus range is covered by a comprehensive 24 month warranty. As an Australian manufacturer we not only have close quality control but we are also uniquely positioned to offer exceptional after sales service.
|Model||Quadra Plus 5||Quadra Plus 9||Quadra Plus 15|
|Suggested No. of Persons||25||60||100|
|Boiling water delivery (cups per hour)||120||180||250|
|Chilled water delivery (cups per hour)||175||175||175|
|Hot Water (litres/hr))||40||60||85|
|Heating element (kW)||1.5||2.2||3.4|
|Current draw (Amps)||10||10||15|
|Underbench Height (mm)||340||340||340|
|Underbench Width (mm)||315||315||315|
|Underbench Depth Water cooled (mm)||465||465||465|
|Underbench Depth Air Cooled (mm)||510||510||510|
Style of dispenser
Choose a dispenser from our standard XL Levered, the innovative XT Touch version which has no levers and a clean style with all operation via a touch pad at the top of the tap or the XR remote which has a separate control pad which can be mounted nearby the tap for greater design flexibility. All versions are available with the complete Boiling and Chilled range.
Integrated drain font
If the dispenser is to be mounted away from a sink, choose our XI Font. The ultimate in modern clean styling, it can be either surface mounted or recessed into the bench top for a completely flush mounting. The font comes complete with a dispenser riser to ensure sufficient clearance.
A dispenser riser can be added separately to create extra clearance under for tall jugs and pots. There are two dispenser riser heights available for the XL, XT and XR dispensers, choose between 70mm and 120mm.
Choice of Finish
XL dispenser available in Matte White, Matte Black, Gloss White, Gloss Black, Grape, French Blue, Red, Gold, Lime Green, Weathered Bronze, Rose Gold, Chrome and Brushed. XT dispenser available in all finishes. XR dispenser available in Chrome. Risers available in all colours and finishes.
Choose a mixer tap for the Quadra Sparkling plus from the standard pin lever style or the stylish gooseneck option. Mixer taps are available in all finishes.
Water cooled or air cooled
Select our standard water cooled or nominate air cooled if preferred. If choosing air cooled don’t forget to allow for a ventilation grille, which we also have available.
In a situation where the underbench unit cannot be mounted directly below the tap, Billi offers a tubing extension kit for our Boiling and Chilled systems which allows the unit to be mounted up to 2 metres away, giving extra design flexibility. We also have an extension kit available for the mixer tap, again allowing the mixer tap to be mounted up to 2 metres away from the underbench unit.
Unless specified, the standard filtration in the Quadra Plus is 5 micron, which provides a high level of water quality whilst maintaining reasonable filter life. We also offer sub micron and premium sub micron filtration for even greater water purity and these filtration options are available with our units when originally supplied.
Absolutely. In fact your dispenser can be installed up to 2.0m from its undersink water filter. Remember, there will be a boiling water delay with a long extension.
You will save space with Quadra Plus, because it comes with a sink mixer tap and supplies its own hot water. This will eliminate the need for a separate hot water service, thereby creating extra space.
No. The Quadra Plus comes as a complete kit including a sink mixer. It is a special type of mixer to allow it to function with the underbench system, we do however offer a couple of different mixer design options.
We recommend a new filter at least every 6-12 months, depending on usage and water quality.
Yes. You should always use the correct filter for your water system.
Yes. As filters catch contaminants, they become soiled. Billi undersink water systems use mains pressure, so reduced chilled water flow indicates you should change filters.
The indicator lights tell you what’s going on. Flashing red means boiling water hasn’t reached 99°C yet. Flashing blue means water hasn’t chilled to set temperature. Both lights will glow solid when this happens.
The orange light will flash continually when your water filter needs changing.
The undersink chilling unit may need a minor service. Change filters before calling a technician.
The heating element may have blown or overloaded. Call an authorised Billi agent to repair your undersink water system.
Contaminants collected in your undersink filter become concentrated when filters reach the end of their life and can affect water taste. Ensure that the filter is replaced at least every 12 months or 6,000 litres.
Push the SELECT button, then arrow down to OPTIONS. Push the SELECT button and set Safety Switch to ON. Touch the indent on the black panel on the back of the tap to allow for a short boiling water flow.
If the Billi dispenser lights are illuminated, your Quadra Plus water system is on.